"At first we were sceptical about Slade Packing, but after trying it we found that the claims made by Slade were real and it has truly been a problem solver for us."
Customer Feedback
Slade Packing
ESS is proud to represent Slade Packing, Inc, a premier group of products designed for reducing shaft and stem wear, minimizing pump flush requirements, minimizing VOC emmissions and providing fire safe protection for valves handling flammable products. Slade packing is manufactured with a patented process where the
ENGINEERED SEALING SOLUTIONS, LLC
"We are committed to turning your costs into profits"
Home
About Us
Line Sheet
Contact Us
Products
Resources
Engineered Sealing Solutions, LLC 3587 Hwy 90, Westlake, LA 70669 phone: 337-882-9943 fax: 337-882-9945
Website Consulting & Development provided by
WSI
Back to Top
vermiculated graphite is bonded to pure carbon fibers that produces a durable matrix of 99.5% pure carbon graphite sealing element. Unlike other products with a simple graphite dispersion to produce sealing the graphite will not be washed out under normal conditions and will remain in to do the sealing.
Products:
Additional Slade products located on our Other Packing page.
Terms of Use
Click Here for Link to the Slade Feet Per Pound Chart
Packing (Slade)
Bearing
Isolators
Mechanical
Seals
Gaskets
Compressor
Packing Rings & Parts
Lubrication
Application Handling
Misc
Products
O-Rings
Power Transmission Couplings
Expansion Joints
Packing (Other)

Slade 3300 Series of Packing

Click

or

to find additional information on the advantages of using Slade Packing Products. 

3300C - Carbon Fiber Reinforced:  Slade’s cost-effective pump and valve packing.  Interlock braid, each strand passes through the body of the packing for maximum tensile strength. 

Limits

Temp: Non-Oxidizers -400ºF/240ºC to 1800ºF/1000ºC); Pressure: 1000 psi (70 kg/cm2); Pumps: No flush service to 4800 fpm (1400 m/min); PH Range: 1 to 14,

3300W

Incolnel wire reinforced 3300C for higher pressures: 5000 psi/350 bar

3300LC

Low chloride, high purity version for Nuclear Plants

 

3300G - Carbon Fiber Corners:  Slade’s best all purpose pump and valve packing. Carbon fiber braided into the corners to provide anti-extrusion at higher pressures without end rings.

Limits

Temp: Non-Oxidizers -400ºF/240ºC to 1800ºF/1000 ºC; Pressure: 5000 psi (350kg/cm2);  Pumps: No flush service to 4800 fpm (1400m/min); PH range: 0 to 14 except in strong oxidizers

3300G CV

For use in hydrocarbon Services

3300G LC

Low chloride version for nuclear power plants

 

3300K - Kevlar Fiber Corners:  Slade’s best triplex pump, reciprocating packing.  Slade’s best reciprocating pump packing for severe abrasives, black liquor, oil well sucker rods, and high pressure reciprocating rods.

Limits

Temp: Maximum 500ºF (260ºC);  Pressure: 5000 psi (350 kg/cm2); Pumps: No flush service to 3000 fpm (900m/min);  PH range: 2 to 12

 

3300CJ - Carbon Fiber Jacket:  Same as 3300C except carbon fiber jacketed. May be used for anti-extrusion for very high pressures. Slade’s anti-extrusion carbon fiber packing.   

Limits

Pressure: 5,000 psi (351kg/cm2); Temp: 1200ºF/350ºC; PH Range: 0 -14 except in strong oxidizers

 

3300CJK - Kevlar Corners:  Used as am anti-extrusion ring (for large throat clearances) and to protect against particulate contamination. Usually only one ring is installed.  

Limits

Temp: 500ºF/260ºC; PH Range: 2-12

 

3300GLC - For Nuclear Power Services: Same as 3300C except for nuclear power services.

Limits

Pressure: 10,000 psi (700kg/cm2)

 
Click here to view Slade's exclusive Lifetime* Replacement Warranty.
Home |
About Us |
Line Sheet |
Contact Us
Products |
Resources |
Pump Packings
Valve Packings